Answers to your questions.
Is the 2 finger levers just standard ones cut in half?
Yes, I just chopped off the standard levers and sanded them down.
I tried the Zetas (you even get one in this sale) but they're 3 finger levers so not to my liking and no one makes 2 finger levers.
When you have a DTX brake rotor, you don't need anymore than 2 fingers to have effective braking.
I feel you have better reaction time with 2 finger levers but that's just my unscientific opinion.
Does the kickstand have a rubber flip flop sole glued to it?
It's actualy part of a car tire carcass, regular rubber would deform too much in sand, but the steel belted tire keeps its shape well.
It's not glued, there's one bolt holding it on so you can swivel it or just remove it entirely.
Have the footrests been left on and larger footrests welded to them?
Yes they are stock footrests with extra steel welded onto them.
They are super wide and comfy but only towards the rear so they don't affect shifting or braking.
You can still remove them and get stock ones or add the racepegs that are included in the sale but I'm sure you wouldn't after you try these wide ones.
Can the rack be taken off easy?
Yes, I can add or remove either the big or small rack in 15 minutes.
You just need an M8, M14 socket and M6 hex driver.
How much Cash without any parts at all?
The parts are free extras, no discount.
Good luck trying to find any DTX or KLX with 7000km and an extra wheelset for 110,000 baht anywhere in this country.
When it gets cool again, I'll probably pull the ad down and ride through Laos again if it doesn't sell.